CO Oxidation Research Articles

Study on the mechanism of CO oxidation and NO removal by CO-SCR over MFe2O4 (M=Co, Cu, Zn)

Study on the mechanism of CO oxidation and NO removal by CO-SCR over MFe2O4 (M=Co, Cu, Zn)

Effect of cobalt on CeO2 nanorod supported Pt catalyst: Structure, performance, kinetics and reaction mechanism in CO oxidation

Catalytic oxidation represents a highly efficient and extensively employed approach for the elimination of CO in exhaust gas. Rationally designing and preparing catalysts with exceptional activity and stability in the presence of H2O and SO2 at low temperatures represent crucial avenues for future advancements. In this work, a series of Pt catalysts supported on CeO2 nanorods incorporated with varying amounts of Cobalt (Co/CeO2 ratio ranging from 0 to10) were prepared and evaluated for their catalytic activity in CO oxidation under both dry and wet conditions. The ultrahigh dispersion of Pt, outstanding redox properties, and abundant oxygen vacancies on the surface of Co-doped CeO2 nanorod supported Pt catalysts were revealed by XRD, HAADF-STEM, Raman spectroscopy and H2-TPR techniques. The catalytic activity for CO oxidation strongly depends on the Co content and reaction conditions. Among them, Pt/Co-CeO2-5 % exhibits the highest CO oxidation performance with a T90 (the temperature to achieve 90 % conversion of CO) of 170 °C under dry conditions, which is significantly lower by 140 °C compared to T90 of Pt/CeO2. Pt/Co-CeO2-1 % demonstrates superior CO oxidation performance with a T90 of 195 °C under wet conditions, exhibiting a reduction in temperature by 65 °C compared to the T90 of Pt/CeO2. Moreover, Pt/Co-CeO2 exhibits excellent resistance to SO2 compared to Pt/CeO2. Kinetic studies, in situ DRIFT analysis and isotopic experiments demonstrated direct participation of H2O in the reaction. On the catalysts with a low Co/Ce ratio (Co/Ce < 0.03), CO readily reacts with hydroxyl groups dissociated from H2O to form carboxyl intermediates, which subsequently undergo rapid decomposition into CO2, resulting in an enhanced reaction rate of CO oxidation at low temperature.

Pinpointing the catalytic role of water in low-temperature CO oxidation on gold catalysts at a molecular level

Water substantially promotes the low-temperature redox reactions catalyzed by gold. However, clarifying the catalytic role of water is challenging due to co-existing OH and H2O species on Au catalysts under working conditions. Here, via controlled preparation of OH and adsorbed H2O species on a NiO/Au(111) inverse model surface combined with isotope-labelling reactants, we provide unambiguous spectroscopic experimental evidence to identify adsorbed H2O species, instead of OH groups, to promote O2 activation for low-temperature CO oxidation at the NiO-Au interface. In combination with theoretical calculations, adsorbed H2O-stabilized O2 species was found to be facilely activated into reactive OOH species but OH stabilized-O2 species could not. These results further discriminate the role of adsorbed H2O species and OH group in O2 activation in gold catalysis, which significantly advances our fundamental understanding of both Au catalysis and catalytic role of H2O.

Four-channel Catalytic Micro-reactor Based on Alumina Hollow Fiber Membrane for Efficient Catalytic Oxidation of CO

Four-channel Catalytic Micro-reactor Based on Alumina Hollow Fiber Membrane for Efficient Catalytic Oxidation of CO

Mechanistic Insights into the Palladium-Catalyzed Perfluoroalkylative Carbonylation of Unactivated Alkenes to β-Perfluoroalkyl Esters: A DFT Study.

Transition metal-catalyzed multicomponent carbonylation is an efficient synthetic strategy to access multifunctional esters in high yields with broad functional group tolerance and good chemoselectivity. Considering the development of highly efficient synthetic methods for esters, it remains significant to grasp the mechanism of constructing multifunctional esters. Herein, density functional theoretical calculations were carried out to acquire mechanistic insight into the synthesis of β-perfluoroalkyl esters from a specific palladium-catalyzed perfluoroalkylative carbonylation of unactivated alkenes using carbon monoxide. A detailed mechanistic understanding of this reaction route includes (1) multistep radical reaction process, (2) C-C coupling and CO insertion, (3) ligand exchange, and (4) Pd-based intermediate oxidation and reductive elimination. The multistep radical process was fundamentally rationalized, including Rf· formation and radicals A and E from unactivated alkene and CO oxidation, respectively. The potential energy calculation indicated that the CO insertion into the perfluorinated alkyl radicals preceded Pd-catalyzed oxidation in the competitively multistep free radical reaction process. In addition, the I-/PhO- exchange step was predicted to be spontaneous to products. The IGMH analysis further attested to the reductive elimination process involved in the rate-determining step. Thus, a simple and valid density functional theory (DFT) approach was developed to reveal the multistep radical mechanism for the Pd-catalyzed perfluoroalkylative carbonylation of unactivated alkenes to access functional β-perfluoroalkyl esters.

Effects of Electric Field on Chemical Looping Combustion: A DFT Study of CO Oxidation on CuO (111) Surface

Effects of Electric Field on Chemical Looping Combustion: A DFT Study of CO Oxidation on CuO (111) Surface

Unique role of silica in MOF-Derived High-Loading Palladium-on-Ceria single atom catalysts with excellent efficiency and durability

In most cases, the sintering tendency of supported metal single atoms could be attributed to the unstable structural characteristics of supports in demanding operating conditions, particularly for high-loading single-atom catalysts (SACs), ultimately resulting in deactivation. To address this issue, SiO2 is employed to enhance the structural stability of both supports and the supported Pd single atoms. SiO2 serves not only to prevent the collapse of support structures but also to promote the activation of surface oxygen species by facilitating electron transfer with the supports. This, in turn, establishes strong metal-support interactions (MSIs) to stabilize and activate atomically dispersed Pd species. Additionally, the electrons donated from Ce-O and Si-O to Pd atoms further catalyze the formation of oxygen vacancies, ultimately leading to significantly improved activity and durability in CO oxidation. Without SiO2, the instability of support structure, coupled with the weak MSIs, promotes the aggregation of Pd atoms, resulting in relatively lower catalytic activity and durability.

Exploring Reversible Redox Behavior in the 6H-BaFeO3-δ (0 < δ < 0.4) System: Impact of Fe3+/Fe4+ Ratio on CO Oxidation.

This work is devoted to evaluating the relationship between the oxygen content and catalytic activity in the CO oxidation process of the 6H-type BaFeO3-δ system. Strong evidence is provided about the improvement of catalytic performance with increasing Fe average oxidation state, thus suggesting the involvement of lattice oxygen in the catalytic process. The compositional and structural changes taking place in both the anionic and cationic sublattices of the catalysts during redox cycles have been determined by temperature-resolved neutron diffraction. The obtained results evidence a structural transition from hexagonal (P63/mmc) to orthorhombic (Cmcm) symmetry. This transition is linked to octahedra distortion when the Fe3+ concentration exceeds 40% (δ values higher than 0.2). The topotactical character of the redox process is maintained in the δ range 0 < δ < 0.4. This suggests that the cationic framework is only subjected to slight structural modifications during the oxygen exchange process occurring during the catalytic cycle.

Unidirectional Electron Transfer on Bismuth-Doped Pt/YMn2O5 for Efficient CO Oxidation as Diesel Oxidation Catalysts

Unidirectional Electron Transfer on Bismuth-Doped Pt/YMn₂O₅ for Efficient CO Oxidation as Diesel Oxidation Catalysts

Dilute RuCo Alloy Synergizing Single Ru and Co Atoms as Efficient and CO‐Resistant Anode Catalyst for Anion Exchange Membrane Fuel Cells

Ruthenium (Ru) is considered a promising candidate catalyst for alkaline hydroxide oxidation reaction (HOR) due to its hydrogen binding energy (HBE) like that of platinum (Pt) and its much higher oxygenophilicity than that of Pt. However, Ru still suffers from insufficient intrinsic activity and CO resistance, which hinders its widespread use in anion exchange membrane fuel cells (AEMFCs). Here, we report a hybrid catalyst (RuCo)NC+SAs/N‐CNT consisting of dilute RuCo alloy nanoparticles and atomically single Ru and Co atoms on N‐doped carbon nanotubes The catalyst exhibits a state‐of‐the‐art activity with a high mass activity of 7.35 A mgRu‐1. More importantly, when (RuCo)NC+SAs/N‐CNT is used as an anode catalyst for AEMFCs, its peak power density reaches 1.98 W cm‐2, which is one of the best AEMFCs properties of noble metal‐based catalysts at present. Moreover, (RuCo)NC+SAs/N‐CNT has superior long‐time stability and CO resistance. The experimental and density functional theory (DFT) results demonstrate that the dilute alloying and monodecentralization of the exotic element Co greatly modulates the electronic structure of the host element Ru, thus optimizing the adsorption of H and OH and promoting the oxidation of CO on the catalyst surface, and then stimulates alkaline HOR activity and CO tolerance of the catalyst.

Dilute RuCo Alloy Synergizing Single Ru and Co Atoms as Efficient and CO-Resistant Anode Catalyst for Anion Exchange Membrane Fuel Cells.

Ruthenium (Ru) is considered a promising candidate catalyst for alkaline hydroxide oxidation reaction (HOR) due to its hydrogen binding energy (HBE) like that of platinum (Pt) and its much higher oxygenophilicity than that of Pt. However, Ru still suffers from insufficient intrinsic activity and CO resistance, which hinders its widespread use in anion exchange membrane fuel cells (AEMFCs). Here, we report a hybrid catalyst (RuCo)NC+SAs/N-CNT consisting of dilute RuCo alloy nanoparticles and atomically single Ru and Co atoms on N-doped carbon nanotubes The catalyst exhibits a state-of-the-art activity with a high mass activity of 7.35 A mgRu-1. More importantly, when (RuCo)NC+SAs/N-CNT is used as an anode catalyst for AEMFCs, its peak power density reaches 1.98 W cm-2, which is one of the best AEMFCs properties of noble metal-based catalysts at present. Moreover, (RuCo)NC+SAs/N-CNT has superior long-time stability and CO resistance. The experimental and density functional theory (DFT) results demonstrate that the dilute alloying and monodecentralization of the exotic element Co greatly modulates the electronic structure of the host element Ru, thus optimizing the adsorption of H and OH and promoting the oxidation of CO on the catalyst surface, and then stimulates alkaline HOR activity and CO tolerance of the catalyst.

Dip coating of ceria–manganese mixed oxides on cordierite and its CO oxidation activity

Dip coating of ceria–manganese mixed oxides on cordierite and its CO oxidation activity

Can the Rate of a Catalytic Turnover Be Altered by Ligands in the Absence of Direct Binding Interactions?

Second sphere coordination effects ubiquitous in enzymatic catalysis occur through direct interactions, either covalent or non-covalent, with reaction intermediates and transition states. We present herein evidence of indirect second sphere coordination effects in which ligation of water/alkanols far removed from the primary coordination sphere of the active site nevertheless alter energetic landscapes within catalytic redox cycles in the absence of direct physicochemical interactions with surface species mediating catalytic turnovers. Density functional theory, in situ X-ray absorption and infrared spectroscopy, and a wide array of steady-state and transient CO oxidation rate data suggest that the presence of peripheral water renders oxidation half-cycles within two-electron redox cycles over μ3-oxo-bridged trimers in MIL-100(M) more kinetically demanding. Communication between ligated water and the active site appears to occur through the Fe-O-Fe backbone, as inferred from spin density variations on the central μ3-oxygen 'junction'. Evidence is provided for the generality of these second sphere effects in that they influence different types of redox half-cycles or metals, and can be amplified or attenuated through choice of coordinating ligand. Specifically in the case of MIL-100(M) materials, the Cr isostructure can be made to kinetically mimic the Fe variant by disproportionately hindering oxidation half-cycles relative to the reduction half-cycles. Kinetic and spectroscopic inferences presented here significantly expand both the conceptual definition of second sphere effects as well as the palette of synthetic levers available for tuning catalytic redox performance through chemical ligation.

New perspectives of Pt–CeO2 system: stabilization on MWCNTs for boosting activity and water‐resistance in CO oxidation at ambient temperatures

The present study elucidates new perspectives regarding the Pt–CeO2 system for CO oxidation. The successful deposition of highly dispersed Pt–CeO2 species onto the surface of multiwalled carbon nanotubes (MWCNTs) led to the formation of abnormally active and water‐resistant catalysts. The catalysts were investigated by structural (XRD, TEM), spectral (XPS), and kinetic (TPR–CO+O2, TPR–CO, TPR–H2) methods. The application of TPR–CO+O2 revealed the remarkably high activity of all Pt–CeO2/MWCNTs catalysts at temperatures below 0 °C. The study of the catalysts at ambient temperature demonstrated high CO conversion in the presence of water vapor at a concentration of 100 ppm CO. The experimental findings suggest that active sites, comprising platinum structures stabilized directly on the surface of MWCNTs, play a pivotal role in the oxidation of CO under humid conditions. A dual–site approach was employed to develop a kinetic model that effectively describes the experimental data. This model provides valuable insights into the mechanism of wet CO oxidation.

Synthesis and Catalytic Performance of High-Entropy Rare-Earth Perovskite Nanofibers: (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 in Low-Temperature Carbon Monoxide Oxidation.

This study investigated the catalytic properties of low-temperature oxidation of carbon monoxide, focusing on (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 synthesized via a glycothermal method using 1,4-butanediol and diethylene glycol at 250 °C. This synthesis route bypasses the energy-intensive sintering process at 1200 °C while maintaining a high-entropy single-phase structure. The synthesized material was characterized structurally and chemically by X-ray diffraction and SEM/EDX analyses. The material was shown to form nanofibers of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3, thereby increasing the active surface area for catalytic reactions, and crystallize in the model Pbnm space group of distorted perovskite cell. Using a custom setup to investigate catalytic properties of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3, the CO oxidation behavior of those high-entropy perovskite oxide was investigated, showing an overall conversion of 78% at 50 °C and 97% at 100 °C. These findings highlight the effective catalytic activity of nanofibers of (Y0.2La0.2Nd0.2Gd0.2Sm0.2)CoO3 under mild conditions and their versatility in various catalytic processes of robust CO neutralization. The incorporation of rare-earth elements into a high-entropy structure could impart unique catalytic properties, promoting a synergistic effect that enhances performance.

Insights into the Construction of Robust Pt Clusters with Satisfactory Stability on CeO2 for the Catalytic Oxidation of CO.

Improving the efficiency of platinum group metals (Pt, Pd, Rh, etc.) in catalytic oxidation reactions remains an urgent topic. The conflict between the low-temperature activity and high-temperature stability of noble metals can hardly reach a consensus. For instance, Pt cluster catalysts supported on CeO2 with high low-temperature activity will suffer from deactivation due to the redispersion under high-temperature lean-burn reaction conditions. Herein, two Pt1/CeO2 prepared by the incipient wetness impregnation method using different Pt precursors possessed varied Pt-O and Pt-O-Ce coordination numbers (CNs). They showed various priorities in CO oxidation versus NH3 selective catalytic oxidation, materials with higher CNPt-O-Ce selectively catalyzing NH3 oxidation to N2 more superior, conversely materials with lower CNPt-O-Ce performing better in CO oxidation. After activation by H2 reduction, both formed massive Pt clusters on the CeO2 surface but showed drastically distinct stability in lean-burn CO oxidation reactions. By summarizing the experimental results of high-angle annular dark-field scanning transmission electron microscopy, X-ray absorption spectroscopy, Raman spectroscopy, in situ diffuse reflectance infrared Fourier transform spectroscopy, etc., it is beyond doubt that the difference in the initial states of Pt1 due to distinct precursors indeed determine the redispersion behavior of the reduced Pt clusters on CeO2. Materials with lower CNPt-O-Ce and higher CNPt-O are more likely to form robust Pt clusters, as they are not conducive to Pt anchoring, thus restricting the reversible structural evolution occurring under lean-burn CO oxidation and reductive conditions. This approach serves as a guide for the convenient and efficient construction and exploration of robust Pt cluster catalysts.

CO oxidation mechanism of silver-substituted Mo/Cu CO-dehydrogenase. Analogies and differences to the native enzyme.

The aerobic oxidation of carbon monoxide to carbon dioxide is catalysed by the Mo/Cu-containing CO-dehydrogenase enzyme in the soil bacterium Oligotropha carboxidovorans, enabling the organism to grow on the small gas molecule as carbon and energy source. It was shown experimentally that silver can be substituted for copper in the active site of Mo/Cu CODH to yield a functional enzyme. In this study, we employed QM/MM calculations to investigate whether the reaction mechanism of the silver-substituted enzyme is similar to that of the native enzyme. Our results suggest that the Ag-substituted enzyme can oxidize CO and release CO2 following the same reaction steps as the native enzyme, with a computed rate-limiting step of 10.4 kcal/mol, consistent with experimental findings. Surprisingly, lower activation energies for C-O bond formation have been found in the presence of silver. Furthermore, comparison of rate constants for reduction of copper- and silver-containing enzymes suggests a discrepancy in the transition state stabilization upon silver substitution. We also evaluated the effects that differences in the water-active site interaction may exert on the overall energy profile of catalysis. Finally, the formation of a thiocarbonate intermediate along the catalytic pathway was found to be energetically unfavorable for the Ag-substituted enzyme.

Highly Active and Sintering-Resistant Pt Clusters Supported on FeOx-Hydroxyapatite Achieved by Tailoring Strong Metal-Support Interactions.

The catalytic performance of supported metal catalysts is closely related to their structure. While Pt-based catalysts are widely used in many catalytic reactions because of their exceptional intrinsic activity, they tend to deactivate in high-temperature reactions, requiring a tedious and expensive regeneration process. The strong metal-support interaction (SMSI) is a promising strategy to improve the stability of supported metal nanoparticles, but often at the price of the activity due to either the coverage of the active sites by support overlay and/or the too-strong metal-support bonding. Herein, we newly constructed a supported Pt cluster catalyst by introducing FeOx into hydroxyapatite (HAP) support to fine-tune the SMSIs. The catalyst exhibited not only high catalytic activity but also sintering resistance, without deactivation in a 100 h test for catalytic CO oxidation. Detailed characterizations reveal that FeOx introduced into HAP weaken the strong covalent metal-support interaction (CMSI) between Pt and FeOx while simultaneously inhibiting the oxidative strong metal-support interaction (OMSI) between Pt and HAP, giving rise to both high activity and thermal stability of the supported Pt clusters.

DFT insights into doping and oxygen vacancy effects on CO and CO₂ adsorptions over CuAl2O4 spinel surfaces

Introducing transition metals into CuAl2O4 spinel enhances catalyst stability and Cu sintering resistance in methanol steam reforming. Yet, the influence of doping on vacancy formation and the adsorption behaviors of CO2 (the primary product) and CO (the notorious byproduct) remains unclear. Herein, we employed DFT + U to investigate CO and CO2 adsorption on perfect, M-doped (Fe, Co, and Ni), and M-doped oxygen-deficient CuAl2O4 spinel (100) and (110) surfaces. We find that stronger CO adsorption on (100) than (110) surfaces across all M-doped surfaces, while CO2 adsorbs more stronger on (110) surfaces. The weakened CO adsorptions are observed on Fe and Ni-doped surfaces, demonstrating that doping plays a significant role in improving the resistance to CO poisoning. Co-doping promotes CO adsorption via a CO3-like structure on CuAl2O4(110) surface and boosts the CO oxidation. Furthermore, infrared spectroscopy simulation indicates that the vibrational frequencies for CO linear adsorption, formation of bent CO2- and CO3-like structures are within the ranges of 2042–2078, 1463–1566, and 1497–1816 cm−1, respectively. In addition, Ov on Ni-doped surfaces can significantly strengthen the CO2 adsorption by 0.6–1.3 eV, highlighting the doping and oxygen-defect engineering in enhancing the CO2 capture. This research uncovers the critical impact of metal doping and oxygen vacancies on CO and CO2 adsorptions over CuAl2O4 spinel catalyst, providing insights for developing catalysts with improved resistance to CO poisoning and enhanced CO oxidation which is vital for methanol steam reforming.

Catalytic activity of ceria-based solid solutions with low-content dopants

Ceria-based solid solutions (M0.01Ce0.99O2) with low-content dopants were synthesized by the co-precipitation method, followed by calcination at the temperature of 500 °C. The effect of doping on catalytic performance in CO oxidation was investigated, and the catalyst physicochemical properties were studied. The introduction of even a small amount of metal dopants significantly increased the activity of catalysts. Thus, the most active catalysts were systems when doping ceria with metals Cu, Mn, and Co, i.e., with a small ionic radius and having multivalent oxidation states. It is shown that the high activity was a result of the increased interaction of Mδ+ with ceria due to facile electron exchange between Mδ+ and Ce4+/Ce3+, the redox cycle was one of the key factors in the CO oxidation, as well as well-integrated metal species in ceria lattice, especially in subsurface layer.